Measure the points you define

Canthal Tilt Calculator

Canthal tilt follows the line between an eye’s inner and outer corners. Mark both eyes to read their signed angles and the difference between them. Keep the photo level, because head roll changes this image-based reference.

Canthal tilt toolPrivate · Manual points

Choose a photo to place reference points.

Measure canthal tilt in your photo

Mark defined points on your photo. Read the geometry as you adjust them.

Tap the photo to place the selected point. Arrow keys move a crosshair; Enter or Space places it. Shift moves faster. Exact coordinates are available beside the photo.

JPG, PNG or WebP · Up to 20 MB · Processed only in this browser.

Place defined reference points

Mark inner and outer corners of each eye. Positive means the outer corner is higher in this image. This is a manual photo angle, with no ideal or rating.

Enter exact coordinates

Coordinates are percentages from the image’s left and top edges.

Your photo measurements

Place all reference points to see the measurements.

Defined manual geometry. No score or population ranking.

Values normally show two decimals; very small nonzero values use scientific notation (for example, 1e-3 means 0.001). The JSON keeps the computed values. These measurements describe a 2D photo. Perspective, expression, head roll and your point selection affect the result.

The four-point guide

Follow the eye corners, not the lashes

The medial canthus is the inner corner toward the nose; the lateral canthus is the outer corner toward the temple. Mark the visible meeting point of the upper and lower eyelid margins. A lash tip, eyeliner wing or eyelid crease is a different endpoint.

Four-point schematic: image-left outer corner, image-left inner corner, image-right inner corner, image-right outer corner. Each outer corner is 24 drawing units above its inner corner across a 240-unit horizontal span, giving +5.71 degrees.
Original schematic, not a reference face. Dashed lines show photo horizontal through each inner corner. Solid lines join the selected corners; the eyelid curves do not enter the calculation.
Positive · above 0°

The outer corner is higher than the inner corner.

Level · 0°

The two selected corners have the same image height.

Negative · below 0°

The outer corner is lower than the inner corner.

“Image-left” means the left side of the displayed photo, regardless of mirroring. Near-zero values can change sign with small placement changes. This tool does not impose a positive/neutral/negative tolerance band.

A repeatable measurement

Set up the photo, then place the points

Choose a straight-on portrait with the camera at eye level, a relaxed expression and both corners visible. Keep your chin neutral and avoid sideways head lean. If glare, hair or makeup hides an endpoint, choose a clearer photo.

Use one image for both eyes. Enlarging a blurry corner will not reveal its exact position. Compare photographs only when pose, expression and camera setup are similar.

  1. Choose a photo or try the sample.JPG, PNG or WebP, up to 20 MB. Processing stays in this browser.
  2. Place four points from image-left to image-right.Outer, inner, inner, outer. Select a point to refine it; keyboard controls and percentage coordinates are available.
  3. Read both angles before their difference.The difference is absolute, so it does not identify which side is higher.
  4. Save the context with the result.Download the measurement JSON or marked PNG. The PNG includes your photo; keep the capture conditions in your own note.
Inspect the arithmetic

How the calculator turns points into degrees

For each eye, let rise = inner y − outer y and span = |outer x − inner x|. Image y increases downward, which is why a higher outer corner gives a positive rise.

θ = atan2(rise, span) × 180 / πSame sign convention for both eyes

A worked point pair

Take the image-left outer point (100, 188) and inner point (220, 200). The rise is 12 pixels and the horizontal span is 120 pixels:

atan2(12, 120) ≈ +5.71°

For the other eye, inner (340, 200) and outer (460, 188) give the same +5.71°. Their absolute difference is |5.71 − 5.71| = 0°. These are illustrative coordinates, not expected facial proportions.

Why endpoint choice matters

Keep the 120-pixel span but change the rise from 12 to 10 pixels: the angle becomes +4.76°. A 14-pixel rise gives +6.65°. A small vertical adjustment can matter more than the displayed hundredths.

Place the points again without copying your first attempt. Note the range of your readings. This checks your placement consistency; it does not establish a clinical confidence interval.

Uniform resizing preserves the angle because rise and span scale together. Stretching only the width or height does not. Use working-image pixel coordinates for this formula: x and y percentages have different scale factors in a non-square photo.

The reference axis matters

Head roll moves the two signed angles in opposite directions

Rotating a flat image changes the eye lines relative to its horizontal edge. Because the eyes point outward in opposite directions, clockwise image rotation increases the image-left angle and decreases the image-right angle, for ordinary near-horizontal eye lines.

Rigid rotation example. Before rotation, both eye-corner lines measure +6 degrees with zero difference. After clockwise rotation by 3 degrees, image-left measures +9 and image-right +3 degrees; the absolute difference is 6 degrees.
The same two lines, rotated together by 3°. The drawing changes the photo reference, not the underlying corner arrangement. This is a geometric example, not a correction applied by the tool.

A difference is a prompt to check the photo

In this example, |9 − 3| = 6° even though the starting pair matched. A difference can reflect pose, point placement or visible anatomy; this calculator cannot separate those causes. Retake a level photo before drawing conclusions.

Chin-up/chin-down rotation is a separate issue. Vaca et al.’s small photography study found that downward head tilt increased apparent positive intercanthal tilt in 12 female volunteers. That finding supports consistent capture conditions, not a fixed correction for every face.

Interpretation

An angle describes a line, not an ideal eye

This page has no validated beauty target, population percentile or diagnostic cutoff. Canthal tilt also differs from eye width, eyelid opening, hooding and eyebrow position. Those features can change the overall appearance without being the four endpoints measured here.

Lee et al. (2020) measured canthal tilt in 76 Korean patients using a reference perpendicular to a facial midline. Their sample averages and clinical categories are not universal targets and should not be applied directly to a photo-horizontal reading.

For other distance comparisons, return to the face proportion calculator.

Common questions

When your photo gives a surprising result

Why do my eyes look downturned when the number is positive?

The corner-to-corner line can rise while the lashes, outer lid contour or surrounding crease slope downward. Check that both points sit where the eyelid margins meet. A positive angle does not describe every curve around the eye.

Why does a close-up look different from a whole-face photo?

First compare camera height, head direction and endpoint visibility. A plain crop of the same image preserves these angles; a newly taken close-up may change pose and perspective. See the selfie perspective guide for the wider photo issue.

Does flipping the photo change positive into negative?

A horizontal mirror swaps image-left and image-right. If you correctly relabel the inner and outer corners, an outer corner that was higher remains higher, so its sign stays the same. Rotating the image is different and can change the angle.

What is a normal or attractive canthal tilt?

This tool cannot assign one. Published values depend on the sample, landmarks and reference plane. A plus or minus sign is a geometric direction; it does not establish attractiveness, eyelid function or the need for treatment.

Can exercises or makeup change the result?

Makeup can change the visible outline and make corner placement harder. The calculator cannot test treatment claims or distinguish a lasting anatomical change from a different photo. For repeat measurements, keep expression and cosmetics consistent and use clearly visible corners.

Does the calculator use AI or upload my photo?

You manually select the four corners; no automatic landmark detector or head leveling runs in this tool. The measurement operates in this browser. The main face symmetry checker uses a different automated method, so its index is not this eye-angle measurement.

Sources and method notes

Research checked October 16, 2026. Diagrams and worked calculations are original illustrations. This page does not claim clinical review.

Read the manual photo measurement definitions for implementation details. For corrections or unclear point instructions, use our contact page.

Privacy settings

Photo analysis works without analytics. You can optionally allow Google Analytics to measure basic page visits. We do not send photos, filenames, face measurements or scores to analytics.

Analytics is off unless you allow it.

Your choice is stored in this browser. Turning analytics off after allowing it reloads this page; save any wanted result first. Read the privacy policy.