Measure the points you define

Smile Symmetry Test

A smile moves several features at once. Mark your mouth corners and philtrum center to compare their height, reflected positions and half-widths in one expression. The result describes that photograph, rather than facial muscle strength.

Smile symmetry toolPrivate · Manual points

Choose a photo to place reference points.

Measure smile symmetry in your photo

Mark defined points on your photo. Read the geometry as you adjust them.

Tap the photo to place the selected point. Arrow keys move a crosshair; Enter or Space places it. Shift moves faster. Exact coordinates are available beside the photo.

The dashed blue vertical line passes through P2. A hollow diamond shows the reflected image-left corner; its dashed link to P3 shows the mismatch. Green circles are your selected points.

JPG, PNG or WebP · Up to 20 MB · Processed only in this browser.

Place defined reference points

Mark both mouth corners and the visible philtrum center. The comparison uses a vertical line through that center. Keep the head level; this is one expression in one photo.

Enter exact coordinates

Coordinates are percentages from the image’s left and top edges.

Your photo measurements

Place all reference points to see the measurements.

Defined manual geometry. No score or population ranking.

Values normally show two decimals; very small nonzero values use scientific notation (for example, 1e-3 means 0.001). The JSON keeps the computed values. These measurements describe a 2D photo. Perspective, expression, head roll and your point selection affect the result.

The smile field guide

Two mouth corners, one chosen reference

The mouth corners, also called oral commissures, are where the upper and lower lips meet at either side. Choose those junctions, rather than the edge of a tooth, a dimple or the end of a shadow.

Original mouth schematic marking P1 at the image-left lip junction, P2 at the philtrum center above the upper lip, and P3 at the image-right lip junction. A vertical line passes through P2.
An illustrative mouth, not a measured person or an ideal smile. Image-left and image-right refer to the photograph as displayed.
  1. P1: image-left mouth corner

    Place the point at the visible lip junction on the left of the displayed photo.

  2. P2: philtrum center above the upper lip

    Use the center of the groove between the nose and upper lip, just above the lip. Its horizontal position defines the vertical reference. The selected point must lie horizontally between both corners.

  3. P3: image-right mouth corner

    Mark the corresponding junction on the other side. Keep the same boundary rule if a corner is partly obscured; choose another photo if you cannot locate it.

This is a philtrum-based photo reference, not an independently established whole-face midline. The calculation uses P2’s horizontal coordinate; changing only its height does not change the results.

Start with a readable photograph

Keep the pose consistent with the question

For a smiling expression, use an unobstructed front-facing smile with the camera at eye level, even light and an upright head. Let the expression settle instead of forcing one corner. Avoid beauty filters, stretched images and a very close viewpoint. See how selfie perspective affects facial measurements.

A relaxed mouth answers a different question. If you record both expressions, keep the camera position and head angle similar and label each image. A still photo captures position, not the path, speed or strength of a smile.

Place, check, save

  1. Choose a JPG, PNG or WebP up to 20 MB, or try the sample.
  2. Place P1, P2 and P3. Select a point again to adjust it. Arrow keys move the crosshair; Enter or Space places the point.
  3. Check the three points before reading the percentages. The exact-coordinate editor uses percentages of image width and height.
  4. Use Download measurements for the point definitions and computed values, or Save marked photo for an image record.

Photo processing takes place in this browser. A saved PNG contains your photo. Read the privacy policy before sharing a record.

Three readings, one denominator

What does the smile symmetry test calculate?

Let L and R be the two corners and C the philtrum point. Coordinates are working-image pixels, with x increasing to the right and y increasing downward. The denominator D is the straight corner-to-corner distance, including any height difference.

The shared reference lengthD = √[(Rₓ − Lₓ)² + (Rᵧ − Lᵧ)²]

Every displayed percentage divides a difference by D and multiplies by 100. These are relative photo measurements, without millimeter calibration.

The three measurements and their exact meaning
ReadingCalculationWhat it describes
Corner height difference100 × |Rᵧ − Lᵧ| ÷ DThe vertical gap between the two corners.
Width difference100 × |(Cₓ − Lₓ) − (Rₓ − Cₓ)| ÷ DThe difference between horizontal mouth halves about C.
Reflected corner mismatch100 × √[(2Cₓ − Lₓ − Rₓ)² + (Lᵧ − Rᵧ)²] ÷ DThe distance from reflected L to actual R.
Worked reflection diagram. L is reflected across the vertical reference to L prime. The gap to R has equal horizontal and vertical components of 10 pixels; their diagonal combined gap is 14.14 pixels.
The reflected point keeps L’s height. Mismatch combines the horizontal and vertical gaps; it does not add the percentages.

A worked example you can check

Choose L = (100, 200), C = (150, 160) and R = (210, 190). The horizontal mouth halves are 50 and 60 pixels, while the height gap is 10 pixels.

  • D: √(110² + 10²) = 110.45 pixels.
  • Corner height difference: 100 × 10 ÷ D = 9.05%.
  • Width difference: 100 × 10 ÷ D = 9.05%.
  • Reflected corner mismatch: reflected L is (200, 200), so 100 × √(10² + 10²) ÷ D = 12.80%.

Calculations use the unrounded denominator. The combined mismatch is therefore 12.80%, rather than 18.10%.

Read what was measured

What does an uneven smile result mean?

A 9.05% height difference means the corner-height gap is that fraction of the selected corner distance in this photo. It is not “9.05% abnormal,” a muscle imbalance score or a treatment threshold. There are no validated normal bands or population percentiles for these manual measurements.

Position and movement are different evidence

A 2010 study of voluntary smiles in 155 Japanese women compared three-dimensional corner positions at rest and during expressions. It found asymmetric displacement in its studied sample. That does not establish a universal prevalence, an ideal side or a diagnostic cutoff for a single photograph.

Lip corners and teeth answer different questions

These three points do not measure the tooth midline, gum display, bite plane or jaw structure. An uneven lip outline does not identify which structure caused it. For a persistent bite concern, bring it to a dentist; a photo percentage cannot select a procedure or prescribe exercises.

New facial weakness needs medical assessment. For sudden facial drooping or weakness, especially with speech or arm symptoms, call your local emergency service immediately; see the CDC’s stroke signs. The NHS advises urgent assessment for Bell’s palsy symptoms because early treatment matters. Do not use this calculator to distinguish causes or delay care.

Questions behind the photograph

Before comparing your smile

Why does my smile look different in a flipped photo?

A horizontal flip swaps the displayed sides. With corresponding point placement, these absolute differences stay the same. A different impression does not establish a new physical change. Try the inverted photo tool to compare the same image.

Does zero corner-height difference mean my smile is symmetrical?

It means only that both selected corners have the same y-coordinate. The horizontal halves can still differ, and lip shape, teeth and movement are not fully described by three points.

Can I compare a relaxed mouth with a smile?

You can keep separate records, but the change includes expression, pose and placement differences. The two-photo comparison tool uses a separate detector method; its output is not a before-and-after version of these three manual measurements.

Can this test tell me which side needs exercises?

No. It does not test nerve function, muscle strength or movement over time. Do not infer a weak side from the lower corner or turn a photo result into an exercise plan. Discuss new or persistent functional changes with a clinician.

Privacy settings

Photo analysis works without analytics. You can optionally allow Google Analytics to measure basic page visits. We do not send photos, filenames, face measurements or scores to analytics.

Analytics is off unless you allow it.

Your choice is stored in this browser. Turning analytics off after allowing it reloads this page; save any wanted result first. Read the privacy policy.