Measure the points you define

Nose Symmetry Test

Start with the nose’s visible edges, rather than judging the whole feature at a glance. Mark the nose wings, tip and reference line to compare their positions in your photo. This measures outer geometry, not airflow or the internal septum.

Nose alignment toolPrivate · Manual points

Choose a photo to place reference points.

Measure nose alignment in your photo

Mark defined points on your photo. Read the geometry as you adjust them.

Tap the photo to place the selected point. Arrow keys move a crosshair; Enter or Space places it. Shift moves faster. Exact coordinates are available beside the photo.

The dashed blue line extends the P1–P2 reference axis. A blue hollow diamond marks the perpendicular projection of P5 onto it. The amber hollow diamond is P3 reflected across that axis; its dashed amber link to P4 shows the contour mismatch. Green circles are your selected points. These references also appear in the marked PNG.

JPG, PNG or WebP · Up to 20 MB · Processed only in this browser.

Place defined reference points

Mark the selected bridge-to-base reference, the two nose-wing edges, and the tip. P5 is measured independently of P1 and P2. All percentages use the straight P3–P4 span. This describes visible 2D geometry; it cannot assess breathing or internal structures.

Enter exact coordinates

Coordinates are percentages from the image’s left and top edges.

Your photo measurements

Place all reference points to see the measurements.

Defined manual geometry. No score or population ranking.

Values normally show two decimals; very small nonzero values use scientific notation (for example, 1e-3 means 0.001). The JSON keeps the computed values. These measurements describe a 2D photo. Perspective, expression, head roll and your point selection affect the result.

A map for your photograph

Nose wings, nostril openings and the tip are different things

The nose wings, or alae, form the outer contours beside the nostrils. This tool compares two selected outer wing edges. It does not measure the dark openings inside them or trace the entire nose.

Original front-view schematic: P1 nose bridge center, P2 nose base center, P3 outer nose-wing edge on image-left, P4 corresponding outer edge on image-right, P5 visible nose tip center. The selected reference line joins P1 and P2; dark nostril shapes are unmeasured.
A placement schematic, not a scan or an ideal nose. “Image-left” and “image-right” refer to the displayed photograph.
  1. P1 · Nose bridge center

    Choose a visible center point on the upper bridge. Use the same bridge level when placing it again.

  2. P2 · Nose base center

    Choose the center where the underside of the nose meets the upper-lip area, below the tip. P2 must be below P1; together they define the axis.

  3. P3 · Outer nose-wing edge, image-left

    Mark the lateral outer contour, rather than the inner nostril rim or a shadow.

  4. P4 · Outer nose-wing edge, image-right

    Mark the corresponding outer contour on the other side. Both wing points must lie on opposite sides of the axis.

  5. P5 · Visible nose tip center

    Choose the center of the visible tip region. Avoid using a bright highlight as the landmark.

These are manual photo conventions. P1–P2 is a nose-based reference, not a verified whole-face midline; P5 is not a confirmed three-dimensional anatomical tip point.

Before placing points

Use a photo with readable edges

Face the camera straight on, keep your head upright and use even light. Keep the underside visible without lifting your chin to expose the nostrils. If an edge disappears into glare, shadow or blur, choose a clearer photo rather than inventing its position.

Keep camera distance and pose consistent across retakes. Move the camera farther away and crop afterward if a very close selfie changes the apparent proportions. Ward et al.’s 2018 projection model found greater apparent nasal breadth relative to cheekbone breadth at a short distance. It does not provide a correction for this test’s tip offset or wing mismatch.

Place → inspect → record

  1. Choose a JPG, PNG or WebP up to 20 MB, or try the sample.
  2. Place P1 through P5. Select any point again to refine it; arrow keys and Enter or Space also work.
  3. Inspect the reference line and both contours before reading the numbers. Exact coordinates are available as image percentages.
  4. Download the measurements JSON or save the marked photo. Photo processing stays in this browser; the saved PNG contains your photo.
Read the geometry separately

What the nose symmetry test measures

The shared denominator W is the straight-line distance from P3 to P4, including any height difference. Every percentage below is a distance divided by W, multiplied by 100.

01

Reflected nose-wing mismatch

Reflect P3 across P1–P2, then measure the gap to P4. This combines differences in side distance and position along the axis.

02

Tip offset from reference axis

The shortest distance from P5 to the line. It is perpendicular to the axis, including when that axis leans. The absolute value does not identify a side.

03

Two mismatch components

Side-distance difference compares the wings’ perpendicular distances from the line. Along-axis level difference compares their positions along it. Their squared percentages add to the squared reflected mismatch.

Chosen contour width is also shown in working-image pixels. It is neither a millimeter measurement nor a calibrated anatomical width. Zero mismatch means only that these two selected wing points correspond across this line; it does not establish matching nostril shape or complete nose symmetry.

An example you can reproduce

One wing pair, two independent differences

Use these illustrative working-image pixel coordinates: P1 (200, 100), P2 (200, 300), P3 (120, 240), P4 (290, 250), P5 (212, 220). The reference axis is x = 200.

Geometric worked example with a vertical axis at x equals 200. P3 reflected across it is at 280,240; P4 is ten pixels farther right and ten pixels lower. P5 is twelve pixels from the axis. The wing-to-wing span is approximately 170.29 pixels.
All lines correspond to the example coordinates. The drawing uses a uniform scale; it depicts geometry without a facial outline.
Contour width170.29 px

W = √(170² + 10²), not just the horizontal 170-pixel span.

Reflected mismatch8.30%

Reflected P3 is (280, 240). Its gap to P4 is √(10² + 10²) ≈ 14.14 pixels; 100 × 14.14 ÷ W ≈ 8.30.

Tip offset7.05%

P5 is 12 pixels from x = 200; 100 × 12 ÷ W ≈ 7.05.

The side-distance and along-axis components are each 5.87%: 100 × 10 ÷ W. Neither alone equals the total mismatch. Uniform resizing preserves these percentages; stretching width and height by different amounts can change them.

The line is part of the measurement

Check reference-axis sensitivity before interpreting an offset

Keep the wing and tip points fixed, then inspect P1 and P2 again. Moving either changes the line, so both the reflection and tip distance can change. A small shift can matter when the nose occupies few pixels. Do not move the line to chase a lower number.

For a practical repeatability check, save the first record, reset the points and mark the same photo again without copying the coordinates. If the readings vary, note which landmarks were hard to repeat. Agreement checks your placement consistency on that image; it does not prove anatomical accuracy.

A rigid rotation of the entire flat image and all five points preserves this axis-based geometry while P2 stays below P1 and the wing labels remain valid. Turning your head for another photograph changes the projection and is a different operation. The tool does not reconstruct depth or correct a turned head.

Questions behind the measurement

What a photograph can leave unresolved

Can this tell me whether I have a deviated septum?

No. The septum divides the inside of the nose, while these points describe a surface photograph. ENT Health guidance describes assessment of the nose inside and out. Discuss persistent breathing difficulty, repeated nosebleeds or concerns after an injury with a healthcare professional; an external offset cannot identify the cause.

Why do my nostrils look uneven when the wing mismatch is low?

Outer wing endpoints do not describe opening area, rim shape or the full contour. A low mismatch can coexist with different-looking openings. This test does not calculate nostril size or decide whether an appearance needs treatment.

Will flipping the same photo change the percentages?

With all five points correctly mirrored and the two wing labels swapped, these absolute distances and percentages stay the same. Image-left and image-right swap. Use the inverted photo tool to inspect orientation; a flip does not create a new camera viewpoint.

What is a good or normal nose symmetry result?

This method has no validated normal range, attractiveness grade or treatment threshold. Read each value as geometry relative to your selected line and wing span. A nose-based axis can follow the nose without establishing its alignment with the rest of the face.

Follow the question to the right measurement

Privacy settings

Photo analysis works without analytics. You can optionally allow Google Analytics to measure basic page visits. We do not send photos, filenames, face measurements or scores to analytics.

Analytics is off unless you allow it.

Your choice is stored in this browser. Turning analytics off after allowing it reloads this page; save any wanted result first. Read the privacy policy.