Measure the points you define

Jaw Symmetry Test

An uneven jaw outline and an off-center chin are different observations. Choose a reference line and corresponding contour points to inspect both in your photo. Shadows, facial hair and head turn can change the visible outline.

Jaw and chin alignment toolPrivate · Manual points

Choose a photo to place reference points.

Measure jaw and chin alignment in your photo

Mark defined points on your photo. Read the geometry as you adjust them.

Tap the photo to place the selected point. Arrow keys move a crosshair; Enter or Space places it. Shift moves faster. Exact coordinates are available beside the photo.

The dashed blue line extends the P1–P2 reference axis. A blue hollow diamond marks the perpendicular projection of P5 onto it. The amber hollow diamond is P3 reflected across that axis; its dashed amber link to P4 shows the contour mismatch. Green circles are your selected points. These references also appear in the marked PNG.

JPG, PNG or WebP · Up to 20 MB · Processed only in this browser.

Place defined reference points

The two nose points define a reference axis independently of the chin; they do not establish a clinical facial midline. Choose corresponding jaw-outline points. All percentages use the straight P3–P4 span. A turned head, beard or shadow changes the contour.

Enter exact coordinates

Coordinates are percentages from the image’s left and top edges.

Your photo measurements

Place all reference points to see the measurements.

Defined manual geometry. No score or population ranking.

Values normally show two decimals; very small nonzero values use scientific notation (for example, 1e-3 means 0.001). The JSON keeps the computed values. These measurements describe a 2D photo. Perspective, expression, head roll and your point selection affect the result.

A contour, a chin and a chosen reference

What should you mark on the photo?

The first two points define a straight reference line, extended downward. The chin is deliberately separate: drawing the line through the chin would make its offset zero by definition. “Image-left” means the left of the displayed photo, including when a selfie is mirrored.

Original schematic with P1 nose bridge center, P2 nose base center, P3 image-left jaw outline, P4 image-right jaw outline at the same chosen height and P5 bottom of chin. A dashed line extends through P1 and P2.
Illustrative surface outline. These points do not locate the jawbone, joints or tooth midlines.
  1. P1: nose bridge center. Choose the visible center of the bridge, above the nose base.
  2. P2: nose base center. Mark the center at the bottom of the nose. Keep it below P1; these two points determine the axis.
  3. P3: jaw outline, image-left. Choose a clear point on the lower-face edge and note its height.
  4. P4: jaw outline, image-right. Use the corresponding visible contour at the same photo height, across the axis from P3.
  5. P5: bottom of chin. Mark the lowest visible chin edge in this front view.

A bridge-to-base line is a selected nose reference, not an established anatomical midline. If the nose is off-center or its centers are hard to locate, that limitation carries into both jaw readings.

Before placing points

Make the outline easy to repeat

Use an upright, front-facing portrait with the camera at eye level and a relaxed expression. Keep the whole chin visible, with even lighting on both sides. Do not force your jaw sideways to align it with the camera.

A beard edge, hair, collar or shadow is not a reliable skin boundary. Choose another image when an endpoint is hidden. Keep camera distance and framing consistent across retakes; the selfie perspective guide explains why a close viewpoint changes apparent proportions.

Place, refine and save

  1. Choose a JPG, PNG or WebP up to 20 MB, or try the sample.
  2. Place P1–P5 in order. Select an existing point again to refine it.
  3. Use arrow keys and Enter or Space, or enter exact percentage coordinates.
  4. Download the measurements or save the marked photo. The saved PNG contains your photo.

Photo processing stays in this browser. Record the chosen contour height and pose if you plan to repeat the measurement.

Follow the denominator

What does the jaw symmetry test calculate?

The chosen contour width W is the straight-line distance from P3 to P4 in working-image pixels. Every percentage below divides a geometric difference by W and multiplies by 100. Width is not a measurement in millimeters or a tracing of the jawline.

Separate readings from the same five points
ReadingMeaning in this photo
Reflected jaw-contour mismatchReflect P3 across the P1–P2 axis. Measure the straight gap from that reflected point to P4, then divide by W.
Side-distance differenceCompare the two contour points’ perpendicular distances from the axis. Divide their absolute difference by W.
Along-axis level differenceCompare the contour points’ positions along the axis, then divide the absolute gap by W. This is not necessarily the photo’s vertical height gap.
Chin offset from reference axisMeasure the shortest, perpendicular distance from P5 to the extended axis, then divide by W. The absolute result does not identify a side.

Side-distance and level differences are perpendicular components of the reflected mismatch: mismatch = √(side difference² + level difference²). They explain the combined reading; they are not additional scores to add together. No reading has a validated normal band, beauty ranking or treatment threshold.

A calculation you can reproduce

Matching contour height can still leave a chin offset

Use these illustrative pixel coordinates: P1 (200, 100), P2 (200, 200), P3 (100, 300), P4 (320, 300), P5 (212, 400). The axis is x = 200 and the chosen contour width is 220 pixels.

Worked geometric example: contour points lie 100 and 120 pixels from a vertical axis. The reflected left point is 20 pixels short of the right point. The chin lies 12 pixels from the axis.
The same points produce a 9.09% contour mismatch and a separate 5.45% chin offset. Distances are illustrative pixels.

Follow each distance

  • Side distances: 100 and 120 px. Difference = 20 px, so 9.09%.
  • Along-axis level difference: both contour points have y = 300, so 0%.
  • Reflected mismatch: reflected P3 is (300, 300), 20 px from P4. Result: 9.09%.
  • Chin offset: |212 − 200| = 12 px. Result: 5.45%.

If P4 is instead placed at (320, 310), W becomes √(220² + 10²) ≈ 220.23 px. Side and level differences become 9.08% and 4.54%; their combined mismatch is 10.15%.

Uniform resizing preserves the percentages; W in pixels changes. A modest rigid rotation of all five points together also preserves this axis-based geometry, provided P2 stays below P1 and the contour points remain on their required sides. Turning a three-dimensional head is different: perspective changes the visible positions and contour.

Use the result for the question it answers

What can you conclude from an uneven jawline photo?

A 9.09% mismatch means that the reflected contour-point gap is 9.09% of the selected width. It does not mean the whole jaw is “9.09% asymmetric.” Two edge points do not capture the complete curve, jaw angle, mandibular ramus length, masseter size or dental alignment. Read the facial asymmetry guide for the broader context.

Reset and mark the same photo once more without copying the coordinates. If the result changes noticeably, inspect which point was difficult to repeat. Agreement checks placement consistency on that image; it does not establish anatomical accuracy.

Why a photo cannot identify the cause

Good et al. (2006) studied standardized photographs of 66 orthodontic patients aged 8–19, using whole-outline measures and separate skeletal assessments. That research used a different method; it does not validate these five manual points as a diagnostic test.

For pain, locking, restricted opening or a changed bite, speak with a dentist or doctor. NIDCR’s TMD guidance distinguishes those symptoms from painless clicking, which is common and generally does not need treatment.

Questions behind the photograph

Before interpreting your jaw or chin

Why does my jaw look more uneven in a flipped photo?

Flipping the same image swaps the displayed sides. With corresponding points relabeled, these absolute measurements stay the same. A flip does not change the original geometry. A different camera position or head turn can. Compare the same image with the inverted photo tool.

Can a centered chin and uneven jaw outline occur together?

Yes. P5 can lie on the selected axis while P3 and P4 do not reflect onto each other. Likewise, matching contour points can coexist with a chin offset. Neither result describes all of the lower face.

Can chewing, mewing or exercises fix the measured side?

This test cannot identify a cause or prescribe a fix. A wider visible side does not establish a larger masseter or show which side to train. The American Association of Orthodontists reports no scientific evidence supporting mewing’s jaw-reshaping claims. Treatment choices require assessment of the actual concern.

Can I use these numbers to track a treatment?

Keep records if useful, but changing pose, contour height or the nose reference can change the result. These percentages do not establish treatment progress. Follow your clinician’s photography and measurement instructions for clinical comparisons.

Explore the feature that fits your question

Privacy settings

Photo analysis works without analytics. You can optionally allow Google Analytics to measure basic page visits. We do not send photos, filenames, face measurements or scores to analytics.

Analytics is off unless you allow it.

Your choice is stored in this browser. Turning analytics off after allowing it reloads this page; save any wanted result first. Read the privacy policy.